Top knuckle rings have been in trend for quite some time. Every woman knows that accessories complete the outfit. From Rihanna to Vanessa Hudgens, all these celebrities are rocking the knuckle ring. So, today I will like to show you how to make different types of top knuckle rings. I didn’t want to spend much, so I thought why buy one when I can make one. They are so simple to make! I will be making two different types of knuckle rings today: one will be a “Love” ring and the last one will be a chevron knuckle ring.
What you need:
Jewelry Wire (gold or silver)
Love ring: I cut out about 7 inches of wire. Beginning with the letter “L”, leave about 3 inches on the left side. Then, using your pliers curve the right side of the wire up, bend it down to follow the curve of the “L”. You can use your pliers to adjust the look of “L”, if you needed. Then using the pliers, follow the curves of the “O”. Once you are through with that, create the “V” shape and use the round nose pliers to straighten out any unwanted kinks in the wire. Use the pliers to then create the curve of the “E”. Using the wire cutter, cut the excess after the small loop. Close the loop with the flat nose pliers. Lay the “Love” part of the ring on the front part of your finger, and wrap the excess wire around your finger.
Chevron ring: Cut about 3 inches of wire. Fold it in half and use the pliers to press it together to create a point. Carefully open the wire and fold the wire around your finger. Press down in the front and fold the wire together at the back. Cut the wire shorter, if you need to. Now make more to stack together to create the chevron shape, and wear them on!